[et_pb_section fb_built=”1″ _builder_version=”3.22″ custom_padding=”2px|||||” global_colors_info=”{}”][et_pb_row _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n
Upgrading firmware:<\/i><\/b><\/p>\n
\u00a0This page contains instructions and links to the various firmware. Please be aware that not all firmware is compatible with all board revisions. To determine which board you have you can remove the backplate of the pedal and on the main circuit board you will find the text “xyz rev ###<\/b>“, where ###<\/b> will be h<\/em>, i<\/em>, j<\/em>, k<\/em>, l<\/em> or m<\/em>.<\/p>\n <\/p>\n [\/et_pb_text][et_pb_image src=”https:\/\/mtlasm.com\/wp-content\/uploads\/2024\/01\/ct5_revision_example.jpg” title_text=”ct5_revision_example” _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][et_pb_text _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n Above you can see an xyz rev l board. The area where you can find the board revision is highlighted for reference.<\/p>\n [\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.10.8″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”]<\/p>\n Prerequisites:<\/i><\/b>\u00a0<\/p>\n <\/p>\n <\/p>\n <\/span><\/strong><\/span><\/strong><\/span><\/strong>—> The most current <\/a>“standard” <\/a> firmware for rev k<\/em>, l<\/em> and m<\/em> boards (0.971k)<\/a><\/span>. Similar to 0.963k but also works with rev m boards. This firmware works with rev k<\/em>, l<\/em> and m<\/em> pcbs. Each firmware is only for the boards specified in its comments. Not all boards support the latest firmware so please make sure you download the correct firmware for your board revision, you can identify your board revision by taking off the backplate and reading the silkscreen label on the main pcb.<\/p>\n Procedure if using Dfuse software<\/i><\/b>:<\/span><\/p>\n <\/p>\n <\/p>\n [\/et_pb_text][et_pb_video src=”https:\/\/www.youtube.com\/watch?v=8rPN5-Ce2cc” _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_video][et_pb_text _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n Procedure for\u00a0using Dfu-util<\/em><\/strong> with mac OS<\/strong><\/em> X:\u00a0<\/p>\n <\/p>\n <\/p>\n [\/et_pb_text][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.10.8″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>","protected":false},"excerpt":{"rendered":" Upgrading firmware: \u00a0This page contains instructions and links to the various firmware. Please be aware that not all firmware is compatible with all board revisions. To determine which board you have you can remove the backplate of the pedal and on the main circuit board you will find the text “xyz rev ###”, where ### […]<\/p>","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"\n Upgrading firmware:<\/i><\/b><\/p>\n\n\n\n This page contains instructions and links to the various firmware. Please be aware that not all firmware is compatible with all board revisions. To determine which board you have you can remove the backplate of the pedal and on the main circuit board you will find the text \"xyz rev ###<\/b>\", where ###<\/b> will be h, i, j, k, l or m.<\/p>\n\n\n\n Prerequisites:<\/i><\/b><\/p>\n\n\n\n \"Nightly\" firmware .911<\/span>.<\/a> This is the the firmware that ships with the count t o 5 5th anniversary units. Details can be found on the nightly page.<\/a> This firmware has some small tweaks on the beta release.<\/p> \"Nightly\" firmware .9 beta<\/span><\/a>. This was the pre release for the firmware that shipped with the count t o 5 5th anniversary units. Details can be found on the nightly page.<\/a> This firmware has been succeeded by nightly 0.911.<\/p>The most current firmware for rev k, l and m boards (0.971k)<\/a><\/span>. Similar to 0.963k but also works with rev m boards. This firmware works with rev k l and m pcbs. <\/strong> Outdated firmware for rev k and l (0.963k)<\/span><\/a>. It fixes a bug in mode 1 that was introduced in 0.962k. See this post<\/a> for details.<\/p> Outdated firmware for rev k and l boards (0.962k)<\/span><\/a>. This firmware adds one new feature, see this post<\/a> for details.<\/p> Outdated firmware for rev k and l boards (0.96k)<\/span><\/a>. This firmware adds some new features, see this post<\/a> for details.<\/p> What shipped with rev k and l boards up to July 1, 2016 (0.95k)<\/span><\/a>. This firmware adds volume control to each head in mode 3. You can access it by holding the q switch down and turning the respective DIR knob. This firmware shipped with the most recent run, but is newer than what shipped on teh September 2015 run.<\/p> An alternative firmware for rev k and l. (0.941k)<\/span>.<\/a> This firmware does not have the volume controls for DIR knobs in mode 3 that were added in 0.95 but does change the way the soft footswitch works. Instead of holding the footswitch to record in modes 2 and 3, you press and release it, and recording will start when the button is released. You can stop recording and initiate playback by holding and releasing the button again. Tapping will reset\/erase the recording as usual. No change to footswitch behavior in mode 1.<\/p> Outdated\/original firmware for rev k and l pcb. (0.94k).<\/span><\/a> This firmware does not have the volume controls for DIR knobs in mode 3 that were added in 0.95.<\/p>The latest for Rev h\/i (0.931h)<\/span><\/a>. Each firmware is only for the boards specified in its comments. Not all boards support the latest firmware so please make sure you download the correct firmware for your board revision, you can identify your board revision by taking off the backplate and reading the silkscreen label on the main pcb.<\/p> <\/li> Procedure if using Dfuse software<\/i><\/b>:<\/p>\n\n\n\n <\/p>\n\n\n\n Procedure for using Dfu-util<\/em><\/strong> with mac OS<\/strong><\/em> X:<\/p>\n\n\n\n <\/p>\n","_et_gb_content_width":"","_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"jetpack_post_was_ever_published":false,"footnotes":""},"class_list":["post-3918","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/PaT33h-11c","_links":{"self":[{"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/pages\/3918","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/comments?post=3918"}],"version-history":[{"count":20,"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/pages\/3918\/revisions"}],"predecessor-version":[{"id":10424,"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/pages\/3918\/revisions\/10424"}],"wp:attachment":[{"href":"https:\/\/mtlasm.com\/fr\/wp-json\/wp\/v2\/media?parent=3918"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}\n
For STM Dfuse, some people have reported issues getting an st login to be able to get dfuse. Because of this we have also hosted a copy of the installer you can download directly here<\/span><\/strong><\/a> without needing to create an st.com login.<\/li>\n
—> “Nightly” firmware .92.<\/span><\/a> This firmware updates the nightly branch to work with the new rev m<\/em> boards. The “tap” gesture was also updated to be easier to trigger. This firmware works with rev k<\/em>, l<\/em> and m<\/em> pcbs.<\/strong>
“Nightly” firmware .911<\/span>.<\/a> This is the\u00a0 the firmware that ships with the count to 5 “5th anniversary” units.\u00a0 Details can be found on the nightly page.<\/a> This firmware has some small tweaks on the beta release.
“Nightly” firmware .9 beta<\/span><\/a>. This was the pre-release for the firmware that shipped with the count to 5 “5th anniversary” units.\u00a0 Details can be found on the nightly page.<\/a> This firmware has been succeeded by nightly 0.911.<\/li>\n<\/ol>\n
<\/strong>Outdated firmware for rev k<\/em>, l<\/em> and m<\/em> boards (0.97k)<\/a><\/span>. Similar to 0.963k but also works with rev m boards. This firmware works with rev k<\/em>, l<\/em> and m<\/em> pcbs. Has some bugs in mode 3 alt functions.
Outdated firmware for rev k<\/em> and l<\/em> (0.963k)<\/span><\/a>. It fixes a bug in mode 1 that was introduced in 0.962k. See this post<\/a> for details.
Outdated firmware for rev k<\/em> and l<\/em> boards (0.962k)<\/span><\/a>. This firmware adds one new feature, see this post<\/a> for details.
Outdated firmware for rev k<\/em> and l<\/em> boards (0.96k)<\/span><\/a>. This firmware adds some new features, see this post<\/a> for details.
What shipped with rev k<\/em> and l<\/em> boards up to July 1, 2016 (0.95k)<\/span><\/a>. This firmware adds volume control to each head in mode 3. You can access it by holding the q switch down and turning the respective DIR knob. This firmware shipped with the most recent run, but is newer than what shipped on the September 2015 run.
An alternative firmware for rev k<\/em> and l<\/em>. (0.941k)<\/span>.<\/a> This firmware does not have the volume controls for DIR knobs in mode 3 that were added in 0.95 but does change the way the soft footswitch works. Instead of holding the footswitch to record in modes 2 and 3, you press and release it, and recording will start when the button is released. You can stop recording and initiate playback by holding and releasing the button again. Tapping will reset\/erase the recording as usual. No change to footswitch behavior in mode 1.
Outdated\/original firmware for rev k<\/em> and l<\/em> pcb. (0.94k).<\/span><\/a> This firmware does not have the volume controls for DIR knobs in mode 3 that were added in 0.95.
The latest for rev h\/i<\/em> (0.931h)<\/span><\/a>.
The latest for rev j<\/em> (0.931j)<\/span><\/a>.<\/p>\n\n
\n
\/bin\/bash -c \"$(curl -fsSL https:\/\/raw.githubusercontent.com\/Homebrew\/install\/master\/install.sh)\"<\/code><\/li>\nbrew install\u00a0dfu-util<\/code>
to download & install\u00a0dfu-util.\u00a0Allow a few minutes until the install is complete.<\/li>\ndfu-util\u00a0-a 0 -D \/path\/to\/firmware.dfu<\/code> but instead of the generic \/path\/to\/firmware.dfu<\/code>, you’ll need to paste or type the path from step #7 (including the file name)<\/li>\n
For STM Dfuse, some people have reported issues getting an st login to be able to get dfuse. Because of this we have also hosted a copy of the installer you can download directly here<\/span><\/strong><\/a> without needing to create an st.com login.<\/li>
\"Nightly\" firmware .92.<\/span><\/a> This firmware updates the nightly branch to work with the new rev m boards. The \"tap\" gesture was also updated to be easier to trigger. This firmware works with rev k l and m pcbs.<\/strong>
Outdated firmware for rev k, l and m boards (0.97k)<\/a><\/span>. Similar to 0.963k but also works with rev m boards. This firmware works with rev k l and m pcbs. Has some bugs in mode 3 alt functions.
The latest for Rev j (0.931j)<\/span><\/a>.\/bin\/bash -c \"$(curl -fsSL https:\/\/raw.githubusercontent.com\/Homebrew\/install\/master\/install.sh)\"<\/code><\/li>brew install dfu-util<\/code>
to download & install dfu-util. Allow a few minutes until the install is complete. <\/li>dfu-util -a 0 -D \/path\/to\/firmware.dfu<\/code> but instead of the generic \/path\/to\/firmware.dfu<\/code>, you'll need to paste or type the path from step #7 (including the file name)<\/li>